Hybrid

The Myriad-Hybrid™ is the worlds first single piece implant where the osseous element of the implant is titanium and the transmucosal element/abutment portion consists of zirconia.


DESIGN

Myriad implant system range

The osseous element of the Myriad-Hybrid™ implant is similar to the Myriad-Smart™ and features the Bioprofile™ thread, Nanopore™ surface and In-plane Switching™ .

 

 

The transmucosal/abutment element of the Myriad-Hybrid™  comprises zirconia that offers the highest degree of soft tissue integration and health due to the presence of a highly polished area where plaque retention is 85% lower than on a polished titanium surface.

 

 


^ top

.
In-plane Switching™

In-plane Switching™ also provides a wider platform for bone deposition and soft tissue attachment at the bone crest. Keeping in sync with the In-plane Switching™ concept, all the Myriad™ single piece transmucosal implants incorporate a switch area that provides a crestal bone lock.


^ top

SIZES

.

.

.

Myriad-Hybrid™  implants are available in four diameters D3.3, D3.8, D4.5 and D5.7 in lengths L8mm, L9.5mm, L11mm, L13mm and L15mm. The prosthetic platform is consolidated to one size for common use of all prosthetic components.


^ top

COMPONENTS

components – surgery

All Myriad-Hybrid™  implants are delivered with A soft long and short comfort cap for patient comfort during the osseointegration period.

In case of adequate interocclusal clearance where the top of the abutment need not be modified the regular comfort cap can be utilised.

components – surgery

In case of inadequate interocclusal clearance the abutment can be reduced upto the groove marking indicated on the abutment and the short comfort cap can be placed on.

components – impressioning & transfers

The Myriad-Hybrid™ All-in-one™ pack includes a comprehensive impressioning and transfer system to cater to two clinical situations:

1.Optimal implant placement with adequate interocclusal clearance and no abutment prep required.
2.Inadequate interocclusal clearance and abutment prep required.
components – impressioning & transfers
1.Optimal implant placement with adequate interocclusal clearance and no abutment prep required.

In this situation the plastic snap on transfer cap is placed on the implant head, picked up in an impression and the lab analog simply repositioned into the transfer cap to complete the indexed transfer.

components – impressioning & transfers

Following the impression transfer and model making the laboratory can use the  blue castable coping (acrylic burnout)  for a precise and passive  fit of a cast metal crown coping or to scan for a zirconia coping .

components – impressioning & transfers
2.Inadequate interocclusal clearance  and abutment prep required

In such situations where abutment/crown margins are placed just subgingival and retraction is required, included in the package is a soft retraction cap that can be used prior to impression making.

The retraction cap is simply placed over the prepped abutment and kept under finger or biting pressure for two minutes to achieve the necessary retraction.

components – impressioning & transfers

After retraction a direct crown and bridge impression can be made of the prepared  Implant abutment stump.  In case the user would like to make a dynamic pressure transfer coping precise impression of the stump – also included in the package is an impression coping for this purpose.

components – temporisation

Also available in the All-in-one™ package is a white temporisation cap that can be used both in the laboratory to fabricate a temporary crown and also can be used intra-orally to reline a temporary crown onto it.


^ top

PACKAGING

All Myriad™ implants are delivered in a colour coded tamper proof outer packaging.

The outer carton once opened contains patient record labels and a double sterile blister that houses the implant blister and the prosthetic section of the packaging.

The outer Myriad™  blister has a double peel off tab, one for the implant section and the other for the prosthetic section of the blister. The implant section can be opened and the sterile implant blister dropped onto a sterile surface for the surgeon to handle.

The implant section of the blister contains the implant fixture and the regular and short comfort caps.  The prosthetic section of the blister contains transfer cap, retraction cap, impression coping, laboratory analog, temporisation cap and castable coping.


^ top

NEXT TOPICS >>connect-iconsnap-icon provi-icon